Natural Latex Examination and Medical Glove Production Equipment
Introduction
With the most advanced glove production technology and above 99% products' passing rate, this machine is used to produce natural latex examination and medical gloves.
Technical parameters of ST100&ST67 glove production equipment
Technical Characteristics:
1. With the most advanced glove production technology and process layout, and above 99% of the product passing rate. The protein content is below 120micrograms per gram.
2. TPU coating technology.
3. With imported surfactant and coagulant to make the latex filming more even, and the demoulding without powder.
4. With imported advanced driving transmission and main chain structure, low chain operational resistance. Running smoothly and steadily in production at high speed.
5. Driven by only one main electric motor. Solved such problems as much dragging, not easy to run in synch, much breakdown and difficult maintenance etc.
6. Vertical hot wind circulation is adopted in drying oven. It saves near 20% of the energy compared with the other types of hot wind circulation.
7. Roller long brush cleaning technology to wash the fingers of the mould.
8. With technology of mould orientation and coding on machine.
9. Automatic beading adjusting, PU beading roller with long service life.
10. Types with different length, running speed can be designed according to the client's need. The running speed can reach 22m per minute.
Annex I:
Configuration list for rubber surgical glove production line and equipment set
with 60,000 pairs of daily capacity
Annex II:
Configuration list for rubber surgical glove production line and equipment set
with 120,000 pairs of daily capacity
About Us:
China Sinopharm International (Shanghai) Co., Ltd. is a comprehensive commercial service enterprise centering international pharmaceutical business.
It is a wholly-owned subsidiary under China Sinopharm International Corporation and is affiliated to China National Pharmaceutical Group Corporation (referred to as "Sinopharm Group"), a Fortune Global 500. Founded in 1985, the company has an net asset of nearly 200 million yuan. It has complete commercial facilities and 23,000 square meters of properties including an office building and shopping malls in Shanghai's West Nanjing Road commercial area and multiple warehouses. International business are carried out based on the platforms of Sinopharm Group and Sinopharm International Pharmaceutical and aims to spread China's high-quality pharmaceutical products and services to the world.
Through close cooperation with major domestic pharmaceutical companies, high-quality pharmaceutical products and overall solutions are provided to overseas customers. We are a well-known pharmaceutical enterprise in China with partners extending to more than 80 countries and regions around the world.
Introduction
With the most advanced glove production technology and above 99% products' passing rate, this machine is used to produce natural latex examination and medical gloves.
Technical parameters of ST100&ST67 glove production equipment
| Item | Type | |
| ST100 | ST67 | |
| Shape dimension(L×W×H) | 100m×2m×8.3m | 67m×2m×7m |
| Main Motor transmission | 11KW×1Set | 7.5KW×1Set |
| Thermal energy consumption (Steam) | 160X104Kcal/h | 100X104Kcal/h |
| Power consumption | 110KW | 40KW |
| Water consumption | 6T/h | 4.5T/h |
| Chain length of production line | 600m | 425m |
| Mould space | 200mm | 200mm |
| Chain linear velocity(Max) | 17m/minute | 8.5m/minute |
| Quantity of moulds | 3,000 pairs | 2,125 pairs |
| Productivity | 120,000pairs/24h | 60,000pairs/24h |
| Soft water | 6T/24h | 3T/24h |
| Compressed air | 3m3/minute | 2m3/minute |
| Storeys | 6 storeys | 6 storeys |
| Types and specifications of the finished products | Rubber surgical and examination gloves of various types and specifications | |
Technical Characteristics:
1. With the most advanced glove production technology and process layout, and above 99% of the product passing rate. The protein content is below 120micrograms per gram.
2. TPU coating technology.
3. With imported surfactant and coagulant to make the latex filming more even, and the demoulding without powder.
4. With imported advanced driving transmission and main chain structure, low chain operational resistance. Running smoothly and steadily in production at high speed.
5. Driven by only one main electric motor. Solved such problems as much dragging, not easy to run in synch, much breakdown and difficult maintenance etc.
6. Vertical hot wind circulation is adopted in drying oven. It saves near 20% of the energy compared with the other types of hot wind circulation.
7. Roller long brush cleaning technology to wash the fingers of the mould.
8. With technology of mould orientation and coding on machine.
9. Automatic beading adjusting, PU beading roller with long service life.
10. Types with different length, running speed can be designed according to the client's need. The running speed can reach 22m per minute.
Annex I:
Configuration list for rubber surgical glove production line and equipment set
with 60,000 pairs of daily capacity
| No. | Name | Type | Material | Q'ty | Brand | Use |
| 1 | Mixing equipment | |||||
| 1.1 | Vulcanizing tank | 3T | SUS304+Q235 | 1 | China supplier | Pre-vulcanization |
| 1.2 | Sanding machine | 150L | SUS304+Q235 | 1 | China supplier | Titanium dioxide dispersoid preparation |
| 1.3 | Resin exchanger | 0.5T | Q235 | 1 | Zhongxing | Making soft water |
| 1.4 | Storage tank | 3T | SUS304+Q235 | 3 | China supplier | Storage and maturing |
| 1.5 | Filter screen | φ500 | SUS304 | 3 | China supplier | For filtering |
| 1.6 | Filter screen | φ250 | SUS304 | 4 | China supplier | For filtering |
| 1.7 | Control cabinet | 2 | China supplier | Electrical control of compounding equipment | ||
| 2 | Post-vulcanizing equipment | |||||
| 2.1 | Soaking machine | 1M | SUS304 | 2 | China supplier | Soak rinse |
| 2.2 | Drying machine | 200P | SUS304+Q235 | 2 | China supplier | Drying and vulcanization |
| 3 | Dipping equipment | |||||
| 3.1 | Dipping machine LxWxH 67M/2M/7M | Q235 | 1 | China supplier | Glove forming and shaping | |
| 3.2 | Latex adding tank | 2T | SUS304+Q235 | 3 | China supplier | Adding latex into the tank |
| 3.3 | PU preparation and adding tank | 0.6T | SUS304+Q235 | 2 | China supplier | For powder-free gloves |
| 3.4 | Formers | Porcelain | 2,125 pairs | Haosheng | Glove moulds | |
| 3.5 | Electrical instrument and apparatus control cabinet | 1 | China supplier | Operation cabinet of the dipping machine | ||
| 3.6 | Screw type air compressor | 2m3 | 1 | Lida | For stripping | |
| 3.7 | Quick testing facilities | 1 | Quick testing the latex in production process | |||
Annex II:
Configuration list for rubber surgical glove production line and equipment set
with 120,000 pairs of daily capacity
| No | Name | Type | Material | Q'ty | Brand | Use |
| 1 | Mixing equipment | |||||
| 1.1 | Vulcanizing tank | 3T | SUS304+Q235 | 2 | China supplier | Pre-vulcanization |
| 1.2 | Sanding machine | 150L | SUS304+Q235 | 1 | China supplier | Titanium dioxide dispersoid preparation |
| 1.3 | Resin exchanger | 4T | Q235 | 1 | Zhongxing | Making soft water |
| 1.4 | Storage tank | 3T | SUS304+Q235 | 6 | China supplier | Storage and maturing |
| 1.5 | Filter screen | φ500 | SUS304 | 3 | China supplier | For filtering |
| 1.6 | Filter screen | φ250 | SUS304 | 4 | China supplier | For filtering |
| 1.7 | Control cabinet | 2 | China supplier | Electrical control of compounding equipment | ||
| 2 | Post-vulcanizing equipment | |||||
| 2.1 | Soaking machine | 2M | SUS304 | 2 | China supplier | Soak rinse |
| 2.2 | Drying machine | 200P | SUS304+Q235 | 4 | China supplier | Drying and vulcanization |
| 3 | Dipping equipment | |||||
| 3.1 | Dipping machine LxWxH 99M/2M/8.3M | Q235 | 1 | China supplier | Glove forming and shaping | |
| 3.2 | Latex adding tank | 3T | SUS304+Q235 | 3 | China supplier | Adding latex into the tank |
| 3.3 | PU preparation and adding tank | 1T | SUS304+Q235 | 2 | China supplier | For powder-free gloves |
| 3.4 | Formers | Porcelain | 3,000 pairs | Haosheng | Glove moulds | |
| 3.5 | Electrical instrument and apparatus control cabinet | 1 | China supplier | Operation cabinet of the dipping machine | ||
| 3.6 | Screw type air compressor | 3m3 | 1 | Lida | For stripping | |
| 3.7 | Quick testing facilities | 1 | Quick testing the latex in production process | |||
About Us:
China Sinopharm International (Shanghai) Co., Ltd. is a comprehensive commercial service enterprise centering international pharmaceutical business.
It is a wholly-owned subsidiary under China Sinopharm International Corporation and is affiliated to China National Pharmaceutical Group Corporation (referred to as "Sinopharm Group"), a Fortune Global 500. Founded in 1985, the company has an net asset of nearly 200 million yuan. It has complete commercial facilities and 23,000 square meters of properties including an office building and shopping malls in Shanghai's West Nanjing Road commercial area and multiple warehouses. International business are carried out based on the platforms of Sinopharm Group and Sinopharm International Pharmaceutical and aims to spread China's high-quality pharmaceutical products and services to the world.
Through close cooperation with major domestic pharmaceutical companies, high-quality pharmaceutical products and overall solutions are provided to overseas customers. We are a well-known pharmaceutical enterprise in China with partners extending to more than 80 countries and regions around the world.